Before ordering engineered end grain flooring, check that the approved sample, product specification, and purchase order all describe the same configuration. For the END GRAIN product discussed here, the confirmed starting points are a visible growth-ring surface, a birch plywood backing, and support for custom sizing. Ask the supplier to confirm the remaining details in writing. This gives designers a record of the appearance they approved and gives contractors and distributors a clear basis for checking the order.

Confirm the Birch Plywood Backing and the Visible Face Separately
The term birch plywood flooring core refers to the backing in this specification. It does not identify the species of the visible end grain face. Give the two items separate lines in the product schedule: backing material and face species. If a quote says only “engineered wood” or “plywood,” ask the supplier to confirm whether it refers to the same birch plywood construction as the proposed sample.

Request a written construction description tied to the product reference on the quotation. An edge photo or cross-section sample can help the team see the relationship between the face and the backing, but use the written specification to confirm the layer count or thickness if either matters to the project. Do not infer a guarantee against delamination from the backing material or the appearance of a sample. If the project requires evidence of bond performance, ask which documents apply to the exact configuration under review.
Turn Design Requirements into Order Details
Start with the drawing, then specify what the supplier is expected to deliver. A designer might approve the scale of the pattern across a hotel reception area, while a buyer needs the dimensions of the individual units. Record those separately. On the floor plan, mark the area to be covered, the intended layout, and any boundaries or transitions that affect the order. If the dimensions are provisional, label them that way.
The END GRAIN engineered end grain flooring supports custom sizing. Submit the requested length and width with the drawing, and list total thickness and face thickness separately if the project specifies them. Ask the supplier to confirm the feasible dimensions and configuration. If the brief includes a particular color, sheen, or finish, keep it as a request until the supplier confirms it for the product. An approved visual reference should not be treated as confirmation that a finish is available.

Use This Checklist Before Releasing the Purchase Order
Review the quotation against the latest drawing and sample record. Where two documents differ, resolve the discrepancy in writing before issuing the purchase order.
| Check | What to request or compare | What to record |
|---|---|---|
| Product identity and construction | Product reference, written construction description, and sample label. | The same product reference across documents; backing and face species listed separately. |
| Unit dimensions and thickness | Confirmed length, width, total thickness, and face thickness. | Agreed dimensions with units, separate from the visible pattern repeat. |
| Appearance, grade, and finish | Physical sample and written details for the proposed configuration. | Approved sample ID, agreed grade and finish, and any documented appearance criteria. |
| Layout and quantity | Latest marked floor plan, measured coverage, and proposed order quantity. | Drawing revision, area by zone, and final quantity, with any allowance shown separately. |
| Project requirements | Product-specific instructions and any documents the project requires. | Which requirements have been confirmed and which are still open. |
For appearance approval, review multiple pieces together under the intended lighting. Note the range of color and growth-ring contrast that the team accepts. If the team has approved the face appearance but is still reviewing the build or finish, mark the decision appearance approved only. That distinction helps prevent a visual sign-off from being mistaken for approval of the full purchase specification. If the flooring meets a stair landing, mark the transition on the drawing and give the stair components their own references, quantities, and samples.
Frequently Asked Questions
Does birch plywood backing mean the visible face is birch?
No. Birch plywood identifies the backing. Ask the supplier to confirm the face species separately for the product you intend to order.
Can I determine the layer count from an edge photo?
Use an edge photo to orient the team during review. If the layer count is a procurement requirement, ask for written confirmation tied to the selected configuration.
Does an approved sample also confirm the finish and dimensions?
Only if those details were explicitly included in the approval. Record the sample ID, drawing revision, agreed dimensions, and finish together so everyone can see what the sign-off covers.
What should I send if some specifications are still open?
Send the latest marked plan, estimated area, target dimensions, and any color or finish references. Separate fixed requirements from preferences and identify the items you need the supplier to confirm.
Discuss your end grain flooring specification. Share your company name, project type or target market, estimated quantity, and any size, color, or finish requirements. Include a marked drawing or sample reference if available so the review can focus on the configuration you intend to specify.