Skip to content 
Choosing Parquet Panel Sizes: 600, 800 and 1000mm? To choose between parquet panel sizes of 600, 800, and 1000 mm, draw all three grids over the same floor plan, then compare what is visible from the main entrance and what gets cut at the edges. A 600 mm panel repeats more often, a 1000 mm panel gives each motif more space, and an 800 mm panel falls between the two. The right choice depends on the exposed floor and the layout. Check the product specification separately: the listed 600 mm configuration has a 3 mm oak face, while the listed 800 and 1000 mm configurations have a 4 mm face.
Compare the Three Parquet Panel Sizes
A framed pattern makes differences in scale easy to see. On Versailles parquet panels, the square border marks each repeat, while diagonal pieces form the motif inside it. Compare the same pattern and color direction at all three sizes so you can judge the effect of scale without changing the design at the same time.
| Square panel size | Series reference: total thickness / oak face | When to shortlist it | What to check on the plan |
|---|---|---|---|
| 600 × 600 mm | 15 mm / 3 mm | A compact entry or a defined area where you want several complete motifs to remain visible. | Whether closely spaced frames compete with patterned rugs, stone, or other finishes. |
| 800 × 800 mm | 15 mm / 4 mm | A space where you want the individual squares to read clearly without spacing the frames as far apart as a 1000 mm grid. | Where the panel lines meet doorways, furniture edges, and material transitions. |
| 1000 × 1000 mm | 15 mm / 4 mm | An open area with enough unobstructed floor to show the larger motif. | Whether walls or fixed furniture leave mostly partial squares in the main view. |
These are reference configurations from the European oak multilayer engineered parquet series. Confirm which configuration applies to the specific design before specifying or ordering it.
Test the Layout at Entrances, Edges, and Furniture Lines
Mark the main approach, rugs, fixed furniture, and adjacent flooring on the plan. A hotel lounge may have a large floor area but only narrow strips of exposed parquet around the seating. A residence may have a smaller entry with a clear view across the whole floor. In both cases, judge the layout by the amount of pattern people will actually see. Start by comparing a grid centered on the main doorway with one centered on the largest exposed area.
Consider a straight zone that is nominally 2,400 mm wide. On a simple drawing, four 600 mm panels or three 800 mm panels span that width. A centered layout with two full 1000 mm panels leaves a nominal 200 mm cut at each side. Those narrow pieces may be acceptable if the perimeter is visually quiet, but they can interrupt a framed design if they fall along a prominent edge. This example compares layouts only; use verified site dimensions and agreed perimeter details for the final drawing.
When two sizes look equally good from the doorway, compare the least successful edge of each plan. A layout that looks balanced in the center may still leave a partial frame at the most visible threshold. Before changing the panel size, try moving the starting line. Show the proposed cuts on the revised plan so everyone can see what the adjustment solves.
Specify Panel Dimensions and Thickness Separately
Write the panel length, width, total thickness, and oak face thickness as separate fields. In the series references, 15/3 mm means 15 mm overall with a 3 mm oak face; 15/4 mm means 15 mm overall with a 4 mm oak face. A purchase line that says only “15 mm parquet” leaves the face thickness unclear. Likewise, the panel size does not tell the buyer which grade, finish, or color has been approved.
Use the European oak engineered Versailles parquet flooring as a reference for the framed design. For the selected product, ask which size, grade, color, and finish can be supplied together. If you need a custom dimension, color, or pattern adjustment, send the marked plan and identify which features must stay, such as the square border or the orientation of the diagonal weave. Record the confirmed configuration alongside the drawing revision and approved physical sample.
Frequently Asked Questions
Should I use 1000 mm panels in every large room?
No. Compare how much of the floor will remain visible after rugs and furniture are placed. If the main view shows mostly partial motifs, an 800 or 600 mm grid may fit the design better.
Do I need a full-size sample of all three panel sizes?
You can shortlist sizes using layouts drawn at the same scale. Once you have chosen a layout, use a physical sample to review color, grain, and finish. If the repeat or border is critical, ask to review a drawing or an assembled sample that shows it.
Does 15/4 mm mean a thicker panel than 15/3 mm?
Both listed configurations are 15 mm thick overall. The difference is the oak face: 4 mm in the 15/4 mm configuration and 3 mm in the 15/3 mm configuration.
What should I submit for a panel size review?
Send a marked floor plan or room dimensions, the estimated area, the sizes you are considering, and a pattern or color reference. Identify the main view and any doors, borders, or transitions where the pattern needs to end.
Discuss the panel size for your project. Share your company name, project type or target market, estimated area or order quantity, and preferred pattern or color. If you have a marked plan, include it so the discussion can focus on the entrances and edges that will determine the layout.
